The FF-ring clutch lifting anchor is made of fl atsteel St 52-3 with load groups 1,25 to 26,0 t.  The anchors are installed within the mould using a recess former which retains the anchor securely in position during concrete placing.  When removed, a recess suitable for only the correct size of ring clutch is left, and the element can be lifted.  A complete range of anchors is available with, among others, erection anchors, universal anchors, fl at foot anchors and spread anchors.

Advantages:

• reliable and secure system
• available in untreated version, galvanised or stainless steel
• individual test certifi cate available for each type of anchor or ring clutch
• EN ISO 9002-certifi cate, Zertifi kat 75.100.7028, TÜV Rheinland EUROQUA

Download documentation (in french)

The spherical-head lifting anchor is forged from round material St 52-3 with load groups from 1,3 t up to 45,0 t.
The anchor is cast in, together with a recess former, which will be removed after drying of the concrete.
With the FH2 head link, the element can now be lifted.

Advantages:

• reliable and secure system
• available in untreated version, galvanised and stainless steel
• individual cerifi cate of conformity per head link
• individual test certifi cate available for each type of anchor or head link
• ISO 9002-certifi cate

Download documentation (in french)